A Guide to Fixing the Most Common Plumbing Problems
Most plumbing problems go undetected for a while and come to the fore only when things stop working around the house normally. The good news is that some of the plumbing problems can be solved the DIY way if sorted on time. The only things needed from you are patience, time, and knowledge. If you are not able to sort it, you can always search for an ‘emergency plumber near me’ and avail of their services.
Here is a quick guide to fixing the most common plumbing problems.
Faulty Faucets
A dripping faucet can cost you quite a bit in water bills. Sometimes the cause of this problem is a worn-out O-ring. Replace it and see if that fixes the issue for you. Another common cause of a leaky faucet is an old cartridge. Over time mineral deposits clog up the aerator and the seals and gaskets experience the stress of water pressure. It’s a good idea to check if the problem lies there. Corrosion of the valve seat can also lead to faulty faucets. It is better to check all these when faced with a dripping faucet.
Old Leaking Pipes
If the plumbing system in your house comprises of copper wires, it can be quite a problem during extreme temperatures. The temperature changes cause expansion and contraction and lead to cracks in copper pipes. The copper pipe also corrodes with time and causes issues in the plumbing line. Regular maintenance and upkeep are needed to prevent leaking copper pipes.
Running Toilet Issues
A toilet that is running all the time wastes hundreds of gallons daily causing the water bill to soar. Check out the rubber flapper, if they have lost their shape, they fail to properly seal the tank. It is easy to replace and cheap it
Clogs
Clogged pipes are a nightmare, as they can cause a host of other plumbing issues. In the worst-case scenario you may have to search for ‘plumbing services near me’, but most of the time a plunger does the job quite well. It can be tempting to use drain cleaner powders, but they do more harm than good, so avoid using them. The best way to avoid clogs in the first place is to be very mindful of what and how you throw things down the drain. Clean off plates before rinsing them in the sink, and avoid pouring grease down the drain. They eventually build up to cause clogs.
When attempting to fix plumbing issues the DIY way, make sure that you have the proper tools, and know-how to carry out the work. Always shut off the main water supply before attempting to fix anything. In case you get stuck with any of the problems, it is best to seek professional help. If you are looking for plumbing services in Maryland contact Elite Plumbing. You will get the quote for the work upfront and the job will be done right the very first time, every time.
